We guarantee consistent surface quality and a reduction in blasting costs of at least 26%
Is your shot blasting process generating losses? We will find them within 48 hours.
Is your shot blasting process generating losses? We will find them within 48 hours.
We eliminate bottlenecks in surface preparation processes.
We don’t guess – we optimise. We rely on technological audits and hard data from our customers’ production halls.
do 50%
shorter shot blasting cycle time
do 60%
operating cost savings
do 200%
increase in line capacity
Optimal surface preparation for your industry
Don’t look for a machine – find the technology.
We will select the process to achieve the ideal surface roughness
at the lowest unit cost.
KEY INDUSTRIES
- Foundry: Effective removal of burn marks and cleaning of castings.
- Agricultural Machinery: Preparation of parts for durable and aesthetic paint coatings.
- Steel Structures: Removal of rust, scale and preparation of surfaces for welding or painting.
- Metal Industry: Comprehensive solutions for serial and individual production.
MATERIALS PROCESSED
- Steel
- Aluminium
- Cast iron
- Composites
- Painted components
AVAILABLE TECHNOLOGIES
- Shot blasting: Dynamic abrasive blasting cleaning.
- Glass bead blasting: Gentle finishing treatment for non-ferrous metals.
- Corundum blasting: Giving a specific structure and roughness.
Where are your profits going? Optimising grinding is not just about machinery
Poor abrasive, poorly selected shot blasting machine, lack of control over the process. It is precisely because of these mistakes that companies lose thousands of pounds every month.
90
%
of companies do not know the real cost of the shot blasting process. Your benefit: We will show you how a precise calculation of TCO (Total Cost of Ownership) generates immediate savings in your production budget.
75
%
of processes are based on poorly selected abrasives. Your benefit: We will select the fraction and hardness of the abrasive for your specific part, reducing cycle time and spare part wear.
85
%
of surface defects are due to a lack of standards. Your value: We implement procedures and train your staff to ensure that the quality after blasting is consistent, regardless of changes in the schedule.
Frequently asked questions
Find out moreWhy do we have to replace parts so often in the shot blasting shop?
It's not always a matter of part quality. It's often the result of improper turbine angle adjustment, poor separation, or overused abrasive. No one teaches operators how to monitor wear before it's too late.
How much can I realistically save if I change the abrasive?
Sometimes it's 10%, sometimes... 100%. But it's not just about the price per ton. Other factors that matter include service life, dust load, impact on turbines, and cleaning efficiency. We always look at the TCO – total cost of ownership.
Why do we occasionally get complaints from end customers even though everything seems fine?
Because visual quality isn't everything. If the separator lets dust through and the filter can't keep up, the details will have micro-contamination that's invisible but affects the adhesion of paint or zinc.
Why is the processing time for the same part different every month?
Because the amount of shot in circulation, the throw angles, the quality of separation, and the turbine load all change. It's not magic. These are measurable variables that no one can control—but they should.
How do I know that this abrasive is "finished"?
Not by the quantity in the tank. By ammeters, by the quality of the parts, by sieve analysis. A mature process is one that can measure abrasive quality—before problems arise.
